Husky 16628 User Manual download pdf

COMBINATION 8X8 and 10X8 FLOOR KIT

This floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor size

This floor kit is for 10’ x 7’ 8-5/8” and 8’ x 7’ 8-5/8” buildings. Please refer to the appropriate pages

of this instruction manual to build the floor size needed. If constructing an 8X8 storage building,

you will have additional material which can be used to construct a shelf (some cutting required)

or other projects.

07/31/2006

#16628

Important! Please follow these instructions. This kit may be different from the one specified in instruction booklet.

- BEFORE YOU BEGIN -

 First...

Read these instructions thoroughly before you begin

assembly. Assembly is easiest if you follow the steps in

the order shown.

Lumber is graded from only one side. Check the part for

the most attractive face and make sure to face it to the

outside.

 Check all parts

Compare parts you have to the list on page 2. If a part is

missing, circle the part in question in the parts list and

call us toll-free at 1-800-437-0784.

 Assistance required

We recommend that you assemble this floor on level

ground in the location it will be used. Assistance is

necessary to handle, fit, and secure some components.

Two people maybe needed for some steps.

 Squareness is very Important!

Keeping all 90° corners and 90° perpendiculars square

throughout the assembly of this floor kit will make each

succeeding step easier and is necessary to assure that

all components fit together properly.

 Check local zoning

Before starting construction, check with your local

building code official for any required permits, variances,

etc.

 Check floor kit size

Before starting construction on your floor, make sure

that you check in the instruction manual to ensure that

you are building the correct size floor kit for your

building.

Always wear OSHA-APPROVED safety

glasses throughout assembly process

■ Tools required

❑ Hammer

❑ Level

❑ Pencil

❑ Tape Measure

■ Optional tools

❑ Chalk Line

❑ Square

❑ Nail Pouch

❑ Saw

8x8

See pages 2-3-4

FOR MARCO SERIES, SOLAR SHED AND MWP IMPERIAL ONLY

10x8

See pages 5-6

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - - BEFORE YOU BEGIN

1COMBINATION 8X8 and 10X8 FLOOR KITThis floor kit will build either the 10’ wide or 8’ wide x 7’ 8-5/8” deep floor sizeThis floor kit is for 10’ x 7’

Page 2 - FOR 8X8 BUILDINGS

2BAYYXX(2) 3" Nails24"(61 cm)24"(61 cm)24"(61 cm)24"(61 cm)92-5/8"(4) 3" Nailsat Joint96"(244 cm)Center ofStud

Page 3 - CONTINUED

3Nails every 12" (30 cm)through Floor Panels into allFloor Bond Boards and Floor JoistsDCCDAAAFDF92-5/8"96"24"(61 cm)24"(61 c

Page 4 - INSTRUCTIONS

48X8 OPTIONAL SHELFINSTRUCTIONS1 - 23-7/8x92-5/8x5/8" Floor Panel1 - 2x4x89-1/2" Floor Joist2 - 2x4x48" Bond Boards - 2" and 3&q

Page 5 - FOR 10X8 BUILDINGS

5BAYYXX(2) 3" Nails24"(61 cm)24"(61 cm)24"(61 cm)24"(61 cm)24"(61 cm)92-5/8"(4) 3" Nailsat Joint120"(305

Page 6 - 10X8 FLOOR KIT INSTRUCTIONS

6DNails every 12" (30 cm)through Floor Panels into allFloor Bond Boards and JoistsCEA AAAABDEDEDEC92-5/8"120"24"(61 cm)24"(61

Page 7

7NOTES:

Page 8

8NOTES:

Comments to this Manuals

No comments

Husky 16628 User Manual

Browse online or download User Manual for Accessories for electrical Husky 16628. Husky 16628 User Manual

Summary of Contents

Comments to this Manuals