Husky HSTC4140 Use and Care Manual download pdf (Page 1)

Sold Exclusively at The Home Depot

2455 Paces Ferry Road, Atlanta, Georgia 30339

General Safety Information

Read Operating Instructions

Always become familiar with all the instructions and

warnings before operating any pneumatic tool.

Always Wear Approved Eye Protection Impact

resistant eye protection should meet or exceed the

standards as set forth in the United States ANSI Z87.1,

Occupational and Educational Eye and Face Protection.

Look for the marking Z87.1 on your eye protection to

insure that it is an approved style. For further

information, ANSI Z87.1, Occupational and Educational

Eye and Face Protection, is available from the American

National Standards Institute, Inc., 11 West 42nd Street,

New York, NY 10036.

Hearing Protection is Recommended

Hearing protection should be used when the noise level

exposure equals or exceeds an 8 hour time-weighted

average sound level of 85dBA. Process noise, reflective

surfaces, other tools being operated nearby, all add to

the noise level present in your work area. If you are

unable to determine your noise level exposure, we

recommend the use of hearing protection.

Avoid Prolonged Exposure to Vibration

Pneumatic tools can vibrate during use. Prolonged

exposure to vibration or very repetitive hand and arm

movements, can cause injury. Stop using any tool if

discomfort, tingling feeling or pain occurs. You should

consult your physician before resuming use of the tool.

90 PSIG Maximum

Table of Contents

Specifications

General Safety Information

Features & Operation

Maintenance

Parts List

Warranty

Specifications

90 p si g

6. 2b ar /620 kP a

Operation & Parts Manual

1/2" Impact Wrench

Model No. HSTC4140 SKU No. 666531

Description

Husky impact wrenches are designed to operate at an

air pressure of 90 pounds per square inch gauge

pressure (90 PSIG) maximum, at the tool. Use of higher

air pressure can, and may cause injury. Also use of

higher air pressure places the internal components

under loads and stresses they were not designed for,

causing premature tool failure. The air supply should be

claen and dry, preferably lubricated. For best results

drain the moisture from your compressor daily.

Only use sockets designated “For Use With Impact

Wrenches.” Hand tool sockets can break creating a

hazard from flying pieces. Always check sockets,

retainers and drives regularly for wear or damage and

replace when necessary.

Use Only Impact Sockets and Accessories

The Husky model no. HSTC4140 1/2" Impact Wrench is designed

for demanding fastening and maintenance applications. This

tool features a built-in regulator for convenient power output

adjustment, steel anvil housing to protect internal components,

through handle exhaust and a ring type retainer for quick socket

changes.

Drive size..................................................................................1/2"

Free speed (no load) ....................................................7,500 RPM

Impacts per min. ............................................................... 800 IPM

Maximum torque............................................................. 550 ft.lbs.

Weight .............................................................................. 4.85 lbs.

Overall length........................................................................ 7-1/2"

Average air consumption .................................................. 4.5 CFM

Recommended hose size .................................................. 3/8" I.D.

Air inlet..............................................................................1/4 NPT

Maximum Air Pressure ........................................................ 90 PSI

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - 1/2" Impact Wrench

Sold Exclusively at The Home Depot2455 Paces Ferry Road, Atlanta, Georgia 30339General Safety InformationRead Operating InstructionsAlways become fami

Page 2

Modelo No. HSTC4140InstalaciónOperaciónSiempre use aire limpio y seco. La humedad excesiva y la mugre reducen considerablemente la duración de cualqui

Page 3

Para obtener repuestos o conocer el centro de serviciomás cercano, llame gratis al 1-877-841-943811Modelo No. HSTC4140Llave de impacto de 1/2" Ma

Page 4

Sold Exclusively at The Home Depot2455 Paces Ferry Road, Atlanta, Georgia 30339DETECCIÓN Y SOLUCIÓN DE FALLASBajaPotenciaAcciónerráticaHerramientaruid

Page 5 - Exploded View and Parts List

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONSWARNING- Some dust created by using power tools contains chemicals known

Page 6 - Operation & Part Manual

1. Inspect hose connection before each use;2. Do not exceed 90psi when using pneumatic tools.3. Do not kink, twist, knot or abrade hose.Applicable Ran

Page 7 - Contenido

1/2" Impact WrenchOperation & Parts ManualModel No. HSTC4140Always use clean dry air. Excessive moisture and dirt willgreatly reduce the life

Page 8

1/2" Impact WrenchExploded View and Parts ListModel No. HSTC4140For replacement parts or the nearest service center, calltoll free 1-877-841-943

Page 9 - PRECAUCIÓN

Sold Exclusively at The Home Depot2455 Paces Ferry Road, Atlanta, Georgia 303391/2" Impact WrenchOperation & Part ManualModel No. HSTC4140Tro

Page 10 - Modelo No. HSTC4140

Model No. HSTC4140 SKU No. 66653190 p si g6. 2b ar /620 kP aContenidoEspecificacionesInformación de Seguridad GeneralCaracteristicas Y Funcionamien

Page 11

INSTRUCCIONES RESPECTO AL RIESGO DE INCENDIO, CHOQUE ELÉCTRICO, O LESIONES A LAS PERSONAS ADVERTENCIA - Algunos polvos producidos

Page 12

1. Inspeccione la conexión de la manguera antes de cada uso.2. No exceda 90 psi al usar herramientas neumáticas.3. No doble, tuerza, anude ni desgaste

Comments to this Manuals

No comments

Husky HSTC4140 Use and Care Manual Page 1

Browse online or download Use and Care Manual for Power impact wrenches Husky HSTC4140. Husky HSTC4140 Use and Care Manual User Manual

Summary of Contents

Comments to this Manuals