Husky H4640 Instruction Manual download pdf

Operation

Operating the air saw

□ This Air Saw is designed to operate on 90 PSIG. Lower

pressure (below 90 PSIG) will reduce performance of

the tool. Higher air pressure (over 90 PSIG) raises the

performance of the tool beyond its rated capacity and

could cause serious damage to the tool and the user.

Installing the saw blade

WARNING: Disconnect the tool from the air supply before

servicing or changing accessories.

□ Insert hex key (C) into set scew and rotate counter

clockwise to loosen. Insert saw blade (B) into the blade

holder assumbly.

□ Push saw blade (B) in comletely until it stops. Tighten set

screw with hex key (C) by turning the hex key counter

clockwise. Be sure to snap down to avoid coming loose

during opertion.

Removing the saw blade

□ Insert hex key (C) into set scew and rotate counter

clockwise to loosen and remove saw blade (B).

Cutting objects

WARNING: The blade guide must be against the object

while cutting.

□ Place the cutting edge of the saw guard against the work

piece and then press the trigger.

(C)

6 Operation1 Operating the air saw □ This Air Saw is designed to operate on 90 PSIG. Lower pressure (below 90 PSIG) will reduce performance of the to

No comments

Husky H4640 Instruction Manual