Husky H4480 Installation Guide download pdf

Installation

Cleaning the air hose

□ A 3/8” air hose is required, with a maximum length of 25 ft.

□ Clean the air hose of accumulated dust and moisture

before connecting it to the air supply.

NOTE: If a longer air hose is required, connect a 1/2" air

hose to the 3/8" air hose to ensure the impact wrench has

the necessary air supply.

Connecting to the air supply

□ Always use clean dry air. Excessive moisture and dirt will

greatly reduce the life of any air motor. We recommend the

installation of an in-line lter-regulator-lubricator as close

to the tool as possible.

□ Ensure all hoses and ttings are the correct size and

secured tightly.

Recommended Air Line Set-Up

Part Description

A 1/2” Impact Wrench

B Quick Plug

C Quick Coupler

D Air Hose

E In-line Regulator

F In-line Lubricator

G In-line Filter

H Air Compressor

5 Installation1 Cleaning the air hose □ A 3/8” air hose is required, with a maximum length of 25 ft. □ Clean the air hose of accumulated dust and mo

No comments

Husky H4480 Installation Guide