6
Operation
1
Operating the spray gun
□ This air operated spray gun is designed to perform a
the power of compressor air.
□ Do not exceed the maximum air pressure of 45 psi.
□ The trigger lever of this gun has a two-step design. Press
. Press
the trigger lever to the second step to connect the paint
material.
2
□ Adjust the air pressure with the trigger pulled and the air
control knob fully open. If reduced air pressure is desired
for some areas of the spray job, use the air compressor
regulator or air control to reduce pressure as necessary.
□
clockwise.
knob counterclockwise.
□ Set the pattern size to the desired shape. For a full pattern,
turn the pattern control knob counterclockwise. For a
round pattern, turn the pattern control knob clockwise.
□
.
□ The direction of the fan (horizontal or vertical) can by
adjusted by loosening the air cap ring and turning the air
cap 90 degrees.
□
counterclockwise. Observe the spray pattern on the
atomization is achieved.
Air Cap
(1)
Air Cap Ring
(2)
Horizontal Fan
(3)
Vertical Fan
(4)
4
1
2
3
Pattern Control
Knob
(1)
Fluid Control
Knob
(2)
Air Control
Knob
(3)
1
2
Comments to this Manuals