Husky H4455 Instruction Manual download pdf

Operation

Operating the impact wrench

□ This 1/2 in. Impact Wrench is designed to operate on

90 PSIG. Lower pressure (below 90 PSIG) will reduce

performance of the tool. Higher air pressure (over 90

PSIG) raises the performance of the tool beyond its rated

capacity and could cause serious damage to the tool and

the user.

Changing the output torque direction

□ This tool features the reverse switch to change the

output torque direction to tighten (assemble) or loosen

(disassemble) the bolt or fastener.

□ Control the output torque direction by turning the reverse

switch button to the Forward arrow or Reverse arrow

position to change the direction.

Changing the output torque level

□ This tool features the air regulator to manage the output

power located on the back of the housing.

□ Turn the knob to adjust to your desired torque level.

□ The left setting is the lowest power level, the center setting

is a medium power level, adn the right setting is the

highest power level.

Installing and removing the impact

sockets

WARNING: Disconnect the tool from the air supply before

servicing or changing accessories. Always use sockets rated

for impact wrenches.

To install the impact socket:

□ Disconnect the tool from the air source.

□ Select the suitable and desirable socket size.

□ Press t the anvil into the socket.

□ To remove the impact socket:

□ Disconnect the tool from the air source.

□ Use your hand or a suitable tool to remove the socket.

Forward

1 2

6 Operation1 Operating the impact wrench □ This 1/2 in. Impact Wrench is designed to operate on 90 PSIG. Lower pressure (below 90 PSIG) will reduce p

7 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.Operation (continued)5 Tightening or loosening the bolt or fastener WARNI

No comments

Husky H4455 Instruction Manual