Husky 32FC01BP-THD Instruction Manual download pdf (Page 7)

Process:

• Attach (2) Grommets JJ into the holes provided

in C.

• Attach (3) Grommets JJ into the holes provided

in D.

Process:

• Assemble the Single Bitted Lock KK.

Figure 10

LOCK INSTALLATION

Items Needed:

KK - Single Bitted Lock (Qty: 1)

GROMMET INSTALLATION

Items Needed:

JJ - Grommets (Qty: 5)

MAGNET INSTALLATION

Process:

• Place the Magnet HH on the right door in the locations

noted.

• Make sure the adhesive backing is facing towards the

cabinet.

• Close the door to double check the Magnets are in the

correct positions.

• Open the door and remove the protective covering over

the adhesive on the back of the magnet.

• Close the door and press rmly on the front of the door to

seat magnets.

• The magnets will now be attached to the cabinet shell in

the correct location.

Items Needed:

HH - Magnet (Qty: 2)

1.50-in

(3.81cm)

1.50-in

(3.81cm)

1.00-in

(2.54cm)

1.00-in

(2.54cm)

Figure 12

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Husky 32FC01BP-THD Instruction Manual Page 7