Husky 32FC01BP-THD Instruction Manual download pdf (Page 8)

FINAL PLACEMENT

Items Needed:

BB - 1/4-20 x 3/4in Button Head Screw (Qty: 1)

DD - 1/4-20 Flange Nut (Qty: 1)

H - Mounting Bracket (Qty: 1)

MM - #14 x 3 Hex Head Screw (Qty: 1)

Process:

Note: Mounting bracket may be mounted on either side

of the cabinet. Mounting shown on left side.

• Remove the screw BB and nut DD from the side of the

unit the mounting bracket will be placed.

• Place (H) mounting bracket in desired mounting location.

• Loosely attach (H) with the screw (BB) and nut (DD)

removed earlier. Mark center of mounting hole location,

using holes in bracket as a template.

• Remove bracket. Drill 1/4" mounting hole in stud.

• Attach bracket to unit using (1) BB and (1) DD.

• Finger tighten.

• Align cabinet with a stud. Adjust Leveler feet (LL) if

needed.

• After unit is level and in its nal position, secure bracket

to wall using (1) MM.

• Wrench tighten all fasteners.

Figure 13

Figure 13.1

Note: Adjustment of leveling feet can inuence door align-

ment.

SHELF ADJUSTMENT

• Empty shelf.

• Remove fasteners.

• Rotate shelf upward and pull forward, as shown.

• Move shelf to desired location.

• Insert back of shelf in notches, rotate shelf into place

and reinstall fasteners.

LEVELING FOOT ADJUSTMENT

• Adjust Screw Leveler (LL) to desired position with

Flathead Screwdriver or 7/16in open end wrench as

shown.

OPERATION

LOCKING AND UNLOCKING THE UNIT

Locking the Unit:

• Make sure doors are fully closed.

• Insert the key and turn fully to the left.

• Remove key.

Unlocking the Unit:

• Insert the key and turn fully to the right.

• Remove key.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Husky 32FC01BP-THD Instruction Manual Page 8

Comments to this Manuals

Related products and manuals for Unknown Husky 32FC01BP-THD