Husky 32FC01BP-THD Instruction Manual download pdf (Page 4)

ATTACH BOTTOM AND HINGE PLATES

Items Needed:

AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 4)

BB - 1/4-20 x 3/4in Button Head Screw (Qty: 8)

CC - 5/16in Washer (Qty: 4)

DD - 1/4-20 Flange Nut (Qty: 12)

RR - Hinge Plate (Qty: 2)

G - Bottom (Qty: 1)

INSERT INTERIOR SHELVES

Items Needed:

AA - 1/4-20 x 5/8in Carriage Bolt (Qty: 6)

D - Shelf (Qty: 3)

CC - 5/16in Washer (Qty: 6)

DD - 1/4-20 Flange Nut (Qty: 6)

Process:

Note: Shelf D must be installed location 5, as shown in

Figure 4.1, to allow door to lock. Install bottom shelf rst.

• Insert Shelf D from top of unit.

• Place in desired mounting location in back of unit, and

rotate into place as shown.

• Attach using (2) AA, (2) CC, and (2) DD in square

mounting holes as shown.

• Repeat until all (3) shelves are in place.

• Finger tighten.

Process:

• Insert Bottom G into one end of assembly (either end

will work) and attach using (8) BB, and

(8) DD.

• Finger tighten.

NOTE: When placing a hinge plate (RR) on the unit the

loop of the hinge MUST always face towards the outside

of the unit.

• Attach Hinge Plate RR to front of Unit using (4) AA, (4)

CC, and (4) DD.

• Finger tighten.

Figure 4

Figure 4.1

TopBottom

Figure 3

Figure 3.1

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Husky 32FC01BP-THD Instruction Manual Page 4