Husky VT6314 Use and Care Manual download pdf (Page 15)

15 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

Installation - Electrical (continued)

Securing the strain relief

□ Tighten the strain relief nut (1). Place a ﬂ athead

screwdriver into the raised notch, and tap the screwdriver

with a hammer until tight.

□ Tighten the strain relief screws (2) to hold the power cord

securely.

Reinstalling the pressure switch

cover

□ Replace the pressure switch cover. The knob must be in the

same position as when removed to sit correctly in place.

□ Tighten the pressure switch screw (1) with a Phillips

screwdriver. Check that the switch is in the OFF position.

Follow the break-in procedure from the owner’s manual.

1 ... 14 15 16 ... 28

No comments

Husky VT6314 Use and Care Manual Page 15