Husky VT6314 Use and Care Manual download pdf (Page 21)

21 HUSKYTOOLS.COM

Please contact 1-888-43-HUSKY for further assistance.

Maintenance (continued)

Checking the air ﬁ lter

□ Remove the nut (1) and the washer (2).

□ Remove the air ﬁ lter cover (3) from the air ﬁ lter base (5).

□ Remove and inspect the air ﬁ lter element (4).

□ If the air ﬁ lter element is dirty, replace it. Install a new ﬁ lter

element. If the air ﬁ lter element is clean, reinstall it.

□ Reattach the air ﬁ lter cover (3).

□ Reattach the washer (2) and the nut (1). Do not overtighten

the nut as this maintenance process will be repeated

regularly. The nut (1) should be snug enough to hold the air

ﬁ lter cover (3) in place.

MAINTENANCE SCHEDULE

WARNING: Disconnect, tag, and lock out the power

source, and then release all pressure from the system

before attempting to install, service, relocate, or perform

any maintenance.

Operation Daily Weekly Monthly Every 3 Months

Check Oil Level X

Drain Tank X

Check Air Filter X

Check Safety Valve X

Clean Unit X

Check Belt Tension X

Change Oil X

IMPORTANT: Change oil after the ﬁ rst ﬁ fty (50) hours of

operation. Then perform oil changes every three (3) months.

Care and Cleaning

WARNING: Disconnect, tag, and lock out the power

source, and then release all pressure from the system

before attempting to install, service, relocate, or perform

any maintenance.

□ Keep all surfaces clear of debris and dirt.

□ Do not attempt to clean the unit while running. Turn off the unit, disconnect it from the mains, and allow the unit to cool down.

□ Check the air ﬁ lter weekly to see if it needs to be cleaned. Remove the ﬁ lter element. Use hot, soapy water to clean the ﬁ lter and allow

the ﬁ lter to dry before reinstalling and returning the unit to active duty. Replace a ﬁ lter that cannot be cleaned.

14 35 2

1 ... 20 21 22 23 24 25 26 27 28

No comments

Husky VT6314 Use and Care Manual Page 21